{"curtain-wall":{"Name":"Curtain Wall","Slug":"curtainWall","Desc":"Commdoor offers Series 5000 & 5100 (2\") systems for medium-span and low-span buildings, including Stick Capped or Stick SSG applications, and the Series 8000 (2.5\") system for medium-span to high-span buildings including Stick Capped and Split Capped design. These can be used separately or jointly as required.","RenderingUrl":"curtain-wall.jpg?v=1.2","series":{"series-5000-stick-capped":{"Name":"Series 5000 Stick Capped","Smalldesc":" 2\" (50.8mm) wide thermally broken wall system with mullion back. Section sizes from 1\" (25.4mm) to 5\" (127mm) deep.","Description":"

2\" (50.8mm) wide thermally broken wall system with mullion back. Section sizes from 1\" (25.4mm) to 5\" (127mm) deep.<\/p>\r\n

Compatibility:<\/span> Designed to suit all doors and door hardware.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request; different exterior and interior finishes also available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 5000 Series is an exterior glazed system that will accept 1\/4\" (6mm), 3\/8\" (10mm) or 1\/2\" (12mm) single glass and 1\" (25mm) sealed unit glass.<\/p>","Image":"\/media\/comdoor\/products\/series-5000-stick-capped\/series500-stick-capped.jpg","Thumbnail":"\/img\/products\/diagrams\/series-5000-stick-capped-tn.png","PathDetails":"\/media\/comdoor\/products\/series-5000-stick-capped\/S5000.pdf","PathCAD":"\/media\/comdoor\/products\/series-5000-stick-capped\/S5000.zip","PathSpecs":"\/media\/comdoor\/products\/series-5000-stick-capped\/5000%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-5000-stick-ssg":{"Name":"Series 5000 Stick SSG","Smalldesc":" 2\" (50.8mm) wide, two sided, structural silicone glazed thermally broken wall system, with 4\" (101.6mm) mullion back sections. Designed for vertical SSG only.","Description":"

2\" (50.8mm) wide, two sided, structural silicone glazed thermally broken wall system, with 4\" (101.6mm) mullion back sections. Designed for vertical SSG only.<\/p>\r\n

Compatibility:<\/span> Adhesion testing of silicone to finished sections is recommended by the silicone manufacturers. Designed to suit all doors and door hardware.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish only. Other finishes available, samples upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 5000 SSG Series is an exterior glazed system that accepts 1\/4\" (6mm) single glass and 1\" (25mm) sealed unit glass.<\/p>","Image":"\/img\/products\/series500-stick-capped.jpg","Thumbnail":"\/img\/products\/diagrams\/series-5000-stick-ssg-tn.png","PathDetails":"\/media\/comdoor\/products\/series-5000-stick-ssg\/S5000SSG.pdf","PathCAD":"\/media\/comdoor\/products\/series-5000-stick-ssg\/S5000SSG.zip","PathSpecs":"\/media\/downloads\/5000%20SSG%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-5100-stick-capped":{"Name":"Series 5100 Stick Capped","Smalldesc":" 2\" (50.8mm) wide thermally broken low span wall system, with mullion back section sizes 3\" (76.2mm) and 4\" (101.6mm) deep.","Description":"

2\" (50.8mm) wide thermally broken low span wall system, with mullion back section sizes 3\" (76.2mm) and 4\" (101.6mm) deep.<\/p>\r\n

Compatibility:<\/span> Designed to suit all doors and door hardware.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request; different exterior and interior finishes also available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 5100 Series is an exterior glazed system that accepts 1\/4\" (6mm), 3\/8\" (10mm) or 1\/2\" (12mm) single glass and 1\" (25mm) sealed unit glass.<\/p>","Image":"\/img\/products\/series500-stick-capped.jpg","Thumbnail":"\/img\/products\/diagrams\/series-5100-stick-capped-tn.png","PathDetails":"\/media\/comdoor\/products\/series-5100-stick-capped\/S5100.pdf","PathCAD":"\/media\/comdoor\/products\/series-5100-stick-capped\/S5100.zip","PathSpecs":"\/media\/downloads\/5100%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-8000-stick-capped":{"Name":"Series 8000 Stick Capped","Smalldesc":" Thermally broken wall system 2 1\/2\" wide, glass is sealed on both exterior and interior surface. Mullion section comes in 3\" (76.2mm), 4\" (102mm), 5 1\/4\" (133.4mm), 6 5\/8\" (168mm), 8\" (203.2mm) and 10\" (254mm) depths.","Description":"

Thermally broken wall system 2 1\/2\" wide, glass is sealed on both exterior and interior surface. Mullion section comes in 3\" (76.2mm), 4\" (102mm), 5 1\/4\" (133.4mm), 6 5\/8\" (168mm), 8\" (203.2mm) and 10\" (254mm) depths.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized, other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans. Consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8000 Stick Capped series is an exterior glazed system that accepts 1\/4\" (6mm) single glass, 1\/2\" (12.7mm) and 1\" (25mm) sealed unit.<\/p>\r\n

Test Reports:<\/span> NFRC and AWSF reports available upon request.<\/p>","Image":"\/img\/products\/series500-stick-capped.jpg","Thumbnail":"\/img\/products\/diagrams\/series-8000-stick-capped-tn.png","PathDetails":"\/media\/comdoor\/products\/series-8000-stick-capped\/S8000-STICK-CAPPED.pdf","PathCAD":"\/media\/comdoor\/products\/series-8000-stick-capped\/S8000%20STICK%20CAPPED.zip","PathSpecs":"\/media\/downloads\/8000%20STICK%20CAPPED%20SPEC.docx","PathThermal":"\/media\/downloads\/4b-S8000 Stick Capped FG PP Thermal Chart.pdf","PathBrochure":"\/media\/downloads\/Series 8000 brochure.pdf","PathInstallation":""},"series-8000-split-capped":{"Name":"Series 8000 Split Capped","Smalldesc":" Thermally broken wall system 2 1\/2\" wide, glass is sealed on both exterior and interior surface. Mullion section comes in 4\" (102mm), 5 1\/4\" (133.4mm) and 6 5\/8\"(168mm).","Description":"

Thermally broken wall system 2 1\/2\" wide, glass is sealed on both exterior and interior surface. Mullion section comes in 4\" (102mm), 5 1\/4\" (133.4mm) and 6 5\/8\"(168mm).<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized finish, other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Split Capped Assembly:<\/span> Designed for screw port assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span, consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8000 Series is an exterior glazed system that accepts 1\/4\" (6mm), 1\/2\" (12.7mm) single glass and 1\" (25.4mm) sealed unit.<\/p>","Image":"\/img\/products\/series500-stick-capped.jpg","Thumbnail":"\/img\/products\/diagrams\/series-8000-split-capped-tn.png","PathDetails":"\/media\/comdoor\/products\/series-8000-split-capped\/S8000-SPLIT-CAPPED.pdf","PathCAD":"\/media\/comdoor\/products\/series-8000-split-capped\/S8000%20CAPPED%20SPLIT.zip","PathSpecs":"\/media\/downloads\/8000%20SPLIT%20CAPPED%20SPEC.docx","PathThermal":"","PathBrochure":"","PathInstallation":""}}},"high-performance-curtain-wall":{"Name":"High Performance Curtain Wall","Slug":"highPerformanceCurtainWall","Desc":"Commdoor's latest innovation, the Series 8200 Stick and Split Capped system, has incorporated a dual polyamide design to contribute to higher thermal performance for maximum energy saving to meet or exceed building code requirements. We also offer the Series 8000 Stick and Split SSG systems, which deliver the highest performance for future generations. Both systems will give your project the modern image you are looking to achieve.","RenderingUrl":"hp-curtain-wall.jpg?v=1.2","series":{"series-8000-stick-ssg":{"Name":"Series 8000 Stick SSG","Smalldesc":" 2 1\/2\" (63.5mm) wide, structural silicone glazed thermally broken wall system, with mullion sections available in 3\" (76.2mm), 4\" (101.6mm), 5 1\/4\" (133.3mm), 6 5\/8\" (168.2mm), 8\" (203.2mm) and 10\" (254mm) depths.","Description":"

2 1\/2\" (63.5mm) wide, structural silicone glazed thermally broken wall system, with mullion sections available in 3\" (76.2mm), 4\" (101.6mm), 5 1\/4\" (133.3mm), 6 5\/8\" (168.2mm), 8\" (203.2mm) and 10\" (254mm) depths.<\/p>\r\n

Compatibility:<\/span> Adhesion testing of silicone to finished sections is recommended by the silicone manufacturers. Designed to suit all doors and hardware.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized finish; other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span; consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8000 Series is an exterior glazed system that accepts 1\/4\" (6mm), 1\/2\" (12.7mm) single glass, 1\" (25.4mm) sealed unit and 1 3\/4\" (44.4mm) triple glazed sealed unit.<\/p>","Image":"\/img\/products\/high-performance-curtain-wall-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 8000 Stick SSG.jpg","PathDetails":"\/media\/comdoor\/products\/series-8000-stick-ssg\/S8000-STICK-SSG.pdf","PathCAD":"\/media\/comdoor\/products\/series-8000-stick-ssg\/S8000%20STICK%20SSG.zip","PathSpecs":"\/media\/downloads\/8000%20STICK%20SSG%20SPEC.docx","PathThermal":"","PathBrochure":"\/media\/downloads\/Series%208000%20brochure.pdf","PathInstallation":""},"series-8000-split-ssg":{"Name":"Series 8000 Split SSG","Smalldesc":" 2 1\/2\" wide, structurally silicone glazed, with mullion sections available in 4\"(102mm), 5 1\/4\"(133.4mm) and 6 5\/8\"(168mm) depths.","Description":"

2 1\/2\" wide, structurally silicone glazed, with mullion sections available in 4\"(102mm), 5 1\/4\"(133.4mm) and 6 5\/8\"(168mm) depths.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized finish; other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span; consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8000 Series is an exterior glazed system that accepts 1\/4\" (6mm), 1\/2\" (12.7mm) single glass and 1\" (25.4mm) sealed unit.<\/p>","Image":"\/img\/products\/high-performance-curtain-wall-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 8000 Split SSG.jpg","PathDetails":"\/media\/comdoor\/products\/series-8000-split-ssg\/S8000-SPLIT-SSG.pdf","PathCAD":"\/media\/comdoor\/products\/series-8000-split-ssg\/S8000SSG%20SPLIT.zip","PathSpecs":"\/media\/downloads\/8000%20SPLIT%20SSG%20SPEC.docx","PathThermal":"\/media\/downloads\/S8000 Split SSG Thermal Chart.pdf","PathBrochure":"\/media\/downloads\/Series%208000%20brochure.pdf","PathInstallation":""},"series-8200-stick-hp":{"Name":"Series 8200 Stick HP","Smalldesc":" High performance thermally broken curtain wall system, 2 1\/2\" wide. Glass is sealed on both exterior and interior surface. Mullion sections available in 4\" (101.6mm), 5 1\/4\" (133.4mm) and 6 5\/8\" (168.275mm) depths.","Description":"

High performance thermally broken curtain wall system, 2 1\/2\" wide. Glass is sealed on both exterior and interior surface. Mullion sections available in 4\" (101.6mm), 5 1\/4\" (133.4mm) and 6 5\/8\" (168.275mm) depths.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized finish; other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span; consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8200 Series is an exterior glazed system that accepts 1\/4\" (6mm) single glass, 1\/2\" (12.7mm), 1\" (25mm) sealed units and 1 3\/4\" (44.4mm) triple glazed sealed unit.<\/p>","Image":"\/img\/products\/high-performance-curtain-wall-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 8200 Stick HP.jpg","PathDetails":"\/media\/comdoor\/products\/series-8200-new\/S8200-STICK-CAPPED.pdf","PathCAD":"\/media\/comdoor\/products\/series-8200-new\/S8200 STICK CAPPED.zip","PathSpecs":"\/media\/comdoor\/products\/series-8200-new\/8200%20SPECS.docx","PathThermal":"\/media\/downloads\/S8200 Stick System Thermal Chart.pdf","PathBrochure":"\/media\/downloads\/Series%208200%20brochure.pdf","PathInstallation":""},"series-8200-split-hp":{"Name":"Series 8200 Split HP","Smalldesc":" 2-1\/2\" (63.5mm) wide, capped thermally broken wall system, with 4\" (101.6mm), 5-1\/4\" (133.3mm)","Description":"

2-1\/2\" (63.5mm) wide, capped thermally broken wall system, with 4\" (101.6mm), 5-1\/4\" (133.3mm)<\/p>\r\n

Compatibility:<\/span> Adhesion testing of silicone to finished sections is recommended by the silicone manufacturers.<\/p>\r\n

Finish:<\/span> Profiles stocked in mill finish and clear anodized; other finishes available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for shear block and screw port assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span; consult structural engineering for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 8200 Series is an exterior glazed system that accepts 1\/4\" (6mm), 1\/2\" (12.7mm) single glass, 1\" (25mm) sealed unit and 1-3\/4\" triple glass.<\/p>","Image":"\/img\/products\/high-performance-curtain-wall-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 8200 Split HP.jpg","PathDetails":"\/media\/comdoor\/products\/series-8200-new\/S8200 SPLIT CAPPED.pdf","PathCAD":"\/media\/comdoor\/products\/series-8200-new\/S8200 SPLIT CAPPED.zip","PathSpecs":"\/media\/comdoor\/products\/series-8200-new\/8200%20SPECS.docx","PathThermal":"","PathBrochure":"\/media\/downloads\/Series%208200%20brochure.pdf","PathInstallation":""},"series-5200-stick-hp":{"Name":"Series 5200 Stick HP","Smalldesc":"\u00a0High performance thermally broken curtain wall, 2\" wide. Glass is sealed on both exterior and interior surface. Mullion section comes in 4\" (101.6mm) depth.","Description":"

<\/strong> High performance thermally broken curtain wall, 2\" wide. Glass is sealed on both exterior and interior surface. Mullion section comes in 4\" (101.6mm) depth.<\/p>\r\n

Finish:<\/strong> Profile stocked in mill finish and clear anodized, other finishes are available upon request.<\/p>\r\n

Stock Length:<\/strong>  24'-2\" (7.37 meters).<\/p>\r\n

Assembly<\/strong>:<\/strong> Designed for shear block assembly.<\/p>\r\n

Strength: <\/strong>Refer to wind load charts for maximum allowable span, consult structural engineer for final design.<\/p>\r\n

Glazing<\/strong>: 5200 Series is an exterior glazed system which will accept 1\/4\" (6mm) and 1\" (25mm) sealed units.<\/p>","Image":"","Thumbnail":"\/media\/comdoor\/products\/series-5200-stick-hp\/Series 5200 Stick HP.jpg","PathDetails":"\/media\/comdoor\/products\/series-5200-stick-hp\/S5200-STICK-CAPPED.pdf","PathCAD":"\/media\/comdoor\/products\/series-5200-stick-hp\/S5200%20STICK%20CAPPED.zip","PathSpecs":"","PathThermal":"","PathBrochure":"","PathInstallation":""}}},"fixed-window-series":{"Name":"Fixed Window Series","Slug":"fixedWindowSeries","Desc":"Commdoor offers 3 thermally broken fixed window series with various profiles ranging from 4\" thru 8\". These products will accept all Commdoor operable ventilating systems. THESE PRODUCTS ADOPT THE RAIN SCREEN PRINCIPLE","RenderingUrl":"fixed-window-new.jpg","series":{"series-425":{"Name":"Series 425","Smalldesc":" Thermally broken fixed window system with flat face. Overall depth 4\" (101.6mm), 5\" (127mm) & 6\" (152.4mm) frame section.","Description":"

Thermally broken fixed window system with flat face. Overall depth 4\" (101.6mm), 5\" (127mm) & 6\" (152.4mm) frame section.<\/p>\r\n

Compatibility:<\/span> Accepts 225 Series vents & casements. Not suitable for entrance applications.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 and #40 bronze anodized. Other anodized and paint finishes available upon request; different exterior and interior finishes also available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port assembly with overlapped or flush corner joints.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Glazing:<\/span> 425 Series is an interior glazed system and will accept 1\" (25mm) sealed unit glass and 1-3\/4\" (44mm) triple glass unit.<\/p>","Image":"\/img\/products\/fixed-windows-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 425.jpg","PathDetails":"\/media\/comdoor\/products\/series-425\/S0425.pdf","PathCAD":"\/media\/comdoor\/products\/series-425\/S0425.zip","PathSpecs":"\/media\/downloads\/425%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"\/media\/downloads\/Series 425 Thermal Chart.pdf","PathBrochure":"","PathInstallation":""},"series-525":{"Name":"Series 525","Smalldesc":" Thermally broken fixed window system with 1\" nose. Overall depth 5\" (127 mm), 6\" (152.4mm) & 7\" (177.8mm) frame section.","Description":"

Thermally broken fixed window system with 1\" nose. Overall depth 5\" (127 mm), 6\" (152.4mm) & 7\" (177.8mm) frame section.<\/p>\r\n

Compatibility:<\/span> Accepts 225 Series vents & casements. Not suitable for entrance applications.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request; different exterior and interior finishes also available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port assembly with flush corner joints.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 525 Series is an interior glazed system and will accept 1 \"(25mm) sealed unit glass and 1 3\/4 (44mm) triple glass unit.<\/p>","Image":"\/img\/products\/fixed-windows-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 525.jpg","PathDetails":"\/media\/comdoor\/products\/series-525\/S0525-20200817.pdf","PathCAD":"\/media\/downloads\/S0525.zip","PathSpecs":"\/media\/downloads\/525 SPEC WORD DOCUMENT.docx","PathThermal":"\/media\/downloads\/Series 525 Thermal Chart.pdf","PathBrochure":"","PathInstallation":""},"series-625":{"Name":"Series 625","Smalldesc":" Thermally broken fixed window system with 2\" nose. Overall depth 6\" (152.4mm), 7\" (177.8mm) & 8\" (203.2mm) frame section.","Description":"

Thermally broken fixed window system with 2\" nose. Overall depth 6\" (152.4mm), 7\" (177.8mm) & 8\" (203.2mm) frame section.<\/p>\r\n

Compatibility:<\/span> Accepts 225 Series vents and casements. Not suitable for entrance applications.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request; different exterior and interior finishes also available.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port assembly with flush corner joints.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 625 Series is an interior glazed system and will accept 1\" (25mm) sealed unit glass and 1 3\/4 (44mm) triple glass unit.<\/p>","Image":"\/img\/products\/fixed-windows-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 625.jpg","PathDetails":"\/media\/comdoor\/products\/series-625\/S0625-20200817.pdf","PathCAD":"\/media\/comdoor\/products\/series-625\/S0625.zip","PathSpecs":"\/media\/downloads\/625%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"\/media\/downloads\/Series 625 Thermal Chart.pdf","PathBrochure":"","PathInstallation":""}}},"operable-windows":{"Name":"Operable Windows","Slug":"operableWindows","Desc":"Commdoor offers a series of operable windows including roto-style ventilators along with casement, hopper and awning. Designs include a structurally glazed zero sightline version.","RenderingUrl":"operable-window-new.jpg","series":{"series-115":{"Name":"Series 115","Smalldesc":"\u00a0THERMALLY BROKEN OPERABLE CIRCULAR VENT SYSTEM","Description":"

 THERMALLY BROKEN OPERABLE CIRCULAR VENT SYSTEM<\/p>\n

Compatibility:<\/span> Glazed into all Commdoor Aluminum\u2019s curtain wall and framing systems.<\/p>\n

Finish:<\/span> All profiles are stocked in #17 Clear and #40 Bronze anodized. Other anodized and paint finishes are available upon request. Different finishes exterior and interior are avalable.<\/p>\n

Stock Length:<\/span>  Fabricated product only.<\/p>\n

Assembly: <\/span>Designed for screw port assembly with flush corner joints.<\/p>\n

Size Limitation: <\/span>Maximum Width 48\u201d.<\/p>","Image":"\/img\/products\/operable-windows-400.jpg","Thumbnail":"\/img\/products\/diagrams\/0115-V3.jpg","PathDetails":"\/media\/comdoor\/products\/series-115\/S0115.pdf","PathCAD":"\/media\/comdoor\/products\/series-115\/S0115.zip","PathSpecs":"","PathThermal":"","PathBrochure":"","PathInstallation":null},"series-225":{"Name":"Series 225","Smalldesc":"\u00a0Thermally broken operable window system. the 225 series is available in open out and open in casements with exposed hinges. Also projected out and projected in vents with concealed 4 bar hinges.","Description":"

 Thermally broken operable window system. the 225 series is available in open out and open in casements with exposed hinges. Also projected out and projected in vents with concealed 4 bar hinges.<\/p>\r\n

Compatibility:<\/span> Glazed into punched openings, all commdoor aluminum's curtain wall and window framing systems. Note: Specify the type of system the operable windows are to be installed into to determine appropriate vent framing and drainage system.<\/p>\r\n

Finish:<\/span> Offer different finishes exterior and interior. all profiles are stocked in #17 clear and #40 bronze anodized. All other anodized and paint finishes are available upon request.<\/p>\r\n

Product:<\/span> Fabricated product only. frame and sash are designed with crimped corners to ensure tightly sealed assembly.<\/p>\r\n

Strength:<\/span> Performance test size for top projected out vent was 60\" x 36\" and for casement 36\" x 60\". commdoor aluminum will not guarantee vents with larger sizes than which were tested.<\/p>\r\n

Glazing:<\/span> 225 Series is an interior glazed system and will accept 1\" (25mm) sealed unit glass and 1 5\/8\" (41.28mm) triple glazed sealed unit glass.<\/p>\r\n

Specification:<\/span> Tested to ASTM E 283-04, ASTM E 330-02, ASTM E 331-00, ASTM F 588-07 and ASTM E 2068 for Air Leakage, Structural Performance, Water Penetration, Forced Entry Resistance and Operating Force.<\/p>","Image":"\/img\/products\/operable-windows-400.jpg","Thumbnail":"\/img\/products\/diagrams\/0225-RENDER-V5.jpg","PathDetails":"\/media\/comdoor\/products\/series-225\/S0225.pdf","PathCAD":"\/media\/comdoor\/products\/series-225\/S0225.zip","PathSpecs":"\/media\/downloads\/225%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"\/media\/downloads\/S225 Open-In Thermal Chart.pdf","PathBrochure":"","PathInstallation":""},"Commercial Window Hardware":{"Name":"Commercial Window Hardware","Smalldesc":"Commdoor Aluminum stocks a variety of hardware to suit your selected needs.","Description":"

Commdoor Aluminum stocks a variety of hardware to suit your selected needs.<\/p>","Image":"","Thumbnail":"\/media\/comdoor\/products\/Commercial Window Hardware\/operable-windows-400.jpg","PathDetails":"\/media\/comdoor\/products\/Commercial%20Window%20Hardware\/WHW%20(Catalogue).pdf","PathCAD":"","PathSpecs":"","PathThermal":"","PathBrochure":"","PathInstallation":""}}},"entrance-framing":{"Name":"Entrance Framing","Slug":"entranceFraming","Desc":"Commdoor offers both thermally and non-thermally broken entrance systems with a variety of profiles to suit a wide range of architectural applications.","RenderingUrl":"entrance-framing-new.jpg","series":{"series-400-framing-system":{"Name":"Series 400 Framing System","Smalldesc":" Non-thermally broken glazed system. Profile dim. 1 3\/4\" x 4\" (44.5 x 101.6mm) with 5\/8\" (15.9mm) fin.","Description":"

Non-thermally broken glazed system. Profile dim. 1 3\/4\" x 4\" (44.5 x 101.6mm) with 5\/8\" (15.9mm) fin.<\/p>\r\n

Compatibility:<\/span> Designed to suit all standard doors and door hardware.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for bracket assembly.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 400 series is designed for interior glazing applications and will accept single, sealed unit or laminated combinations up to a maximum thickness of 1 1\/4\" (32mm). Glass stop positions are not pre-drilled.<\/p>","Image":"\/img\/products\/enterance-framing-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 400 Framing System.jpg","PathDetails":"\/media\/comdoor\/products\/series-400-framing-system\/S0400.pdf","PathCAD":"\/media\/comdoor\/products\/series-400-framing-system\/S0400.zip","PathSpecs":"\/media\/downloads\/400%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-1450-framing-system":{"Name":"Series 1450 Framing System","Smalldesc":" Non-thermally broken flush glazing system. Profile dim. 1 3\/4\" x 4 1\/2\" (44.5 x 114.3mm).","Description":"

Non-thermally broken flush glazing system. Profile dim. 1 3\/4\" x 4 1\/2\" (44.5 x 114.3mm).<\/p>\r\n

Compatibility:<\/span> Designed to suit all standard doors and door hardware.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port and bracket assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 1450 Series is designed for interior applications and will accept 1\/8\" (3mm), 3\/16\" (4.76mm), 1\/4\" (6.35mm), 5\/16\" (7.94mm) and 3\/8\" (9.53mm) single glass.<\/p>","Image":"\/img\/products\/enterance-framing-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 1450 Framing System.jpg","PathDetails":"\/media\/comdoor\/products\/series-1450-framing-system\/S1450.pdf","PathCAD":"\/media\/comdoor\/products\/series-1450-framing-system\/S1450.zip","PathSpecs":"\/media\/downloads\/1450%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-2500-framing-system":{"Name":"Series 2500 Framing System","Smalldesc":" Thermally broken flush glazing system. Profile dim. 2\" x 4 1\/2\" (50.8 x 114.3mm)","Description":"

Thermally broken flush glazing system. Profile dim. 2\" x 4 1\/2\" (50.8 x 114.3mm)<\/p>\r\n

Compatibility:<\/span> Designed to suit all standard doors and door hardware.<\/p>\r\n

Finish:<\/span> Most profiles are stocked in #17 clear and #40 bronze anodized. Other anodized and paint finishes available upon request.<\/p>\r\n

Stock length:<\/span> 24'-2\" (7.37 meters).<\/p>\r\n

Assembly:<\/span> Designed for screw port and bracket assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable spans.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> 2500 Series is an exterior\/interior glazed system that accepts 15\/16\" (23.8mm), 1\" (25.4mm) and 1 1\/16\" (27mm) sealed unit glass.<\/p>\r\n

Specification:<\/span> Meets or exceeds the performance levels specified in AAMA \/ WDMA \/ CSA 101 \/1,5.2 \/A440-08, NAFS - North American Fenestration Standard \/ Specifications for Windows.<\/p>","Image":"\/img\/products\/enterance-framing-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series 2500 Framing System.jpg","PathDetails":"\/media\/comdoor\/products\/series-2500-framing-system\/S2500.pdf","PathCAD":"\/media\/comdoor\/products\/series-2500-framing-system\/S2500.zip","PathSpecs":"\/media\/downloads\/2500%20SPEC%20WORD%20DOCUMENT.docx","PathThermal":"\/media\/downloads\/S2500%20Thermal%20Chart.pdf","PathBrochure":"","PathInstallation":""}}},"swing-doors":{"Name":"Swing Doors","Slug":"swingDoors","Desc":"Commdoor offers a wide variety of swing doors designed to suit commercial applications, from base non-thermal designs to the true thermally broken high-performance doors.","RenderingUrl":"swing-doors.jpg?v=1.2","series":{"series-175-350-500-doors":{"Name":"Series 175\/350\/500 Doors","Smalldesc":"Series 175 narrow-style door: Designed for general applications. Combines strength, economy and typical hardware.","Description":"

Series 175 narrow-style door:<\/span> Designed for general applications. Combines strength, economy and typical hardware.<\/p>\r\n

Design:<\/span> Thickness: 1 3\/4\" (44.5mm); stiles: 2\" (50.8mm); top rail: 2 1\/4\" (57.2mm); bottom rail: 3 7\/8\" (98.4mm).<\/p>\r\n

Series 350 medium-style door:<\/span> Designed for the institutional market, where a wide range of specialty hardware is usually specified.<\/p>\r\n

Design:<\/span> Thickness: 1 3\/4\" (44.5mm); stiles: 3 1\/2\" (88.9mm); top rail: 3 7\/8\" (98.4mm); bottom rail: 6\" (152.4mm).<\/p>\r\n

Series 500 wide-style door:<\/span> Designed for the monumental market, using most available aluminum door hardware.<\/p>\r\n

Design:<\/span> Thickness: 1 3\/4\" (44.5mm); stiles: 5\" (127mm); top rail: 5\" (127mm); bottom rail: 6\" (152.4mm).<\/p>\r\n

Assembly:<\/span> Welded corner assembly.<\/p>\r\n

Glazing:<\/span> All doors will accept 13\/64\" (5mm), 3\/8\" (10mm) or 1\/2\" (12mm) single glass and 15\/16\" (24mm) sealed glass units.<\/p>\r\n

Note:<\/span> Commdoor Aluminum does not stock 1\" (25.4mm) sealed-unit glass.<\/p>\r\n

Options:<\/span> Top and bottom rails up to 12\" high are available, and a variety of horizontal and vertical rails can be applied.<\/p>","Image":"\/img\/products\/swing-doors-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series-175-350-500.jpg","PathDetails":"\/media\/comdoor\/products\/series-175-350-500-doors\/S0175_350_500.pdf","PathCAD":"\/media\/comdoor\/products\/series-175-350-500-doors\/S0175_350_500.zip","PathSpecs":"\/media\/downloads\/DOOR%20SPECIFICATIONS.doc","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-260-360-560-doors":{"Name":"Series 260\/360\/560 Doors","Smalldesc":"Series 260 narrow style door: Designed for general applications. Combines strength, economy and typical hardware.","Description":"

Series 260 narrow style door:<\/span> Designed for general applications. Combines strength, economy and typical hardware.<\/p>\r\n

Design:<\/span> Thickness: 2\" (50.8mm); stiles: 2\" (50.8mm); top rail: 2 1\/4\" (57.2mm); bottom rail: 3 7\/8\" (98.4mm).<\/p>\r\n

Series 360 medium style door:<\/span> Designed for the institutional market, where a wide range of specialty hardware is usually specified.<\/p>\r\n

Design:<\/span> thickness: 2\" (50.8mm); stiles: 3 1\/2\" (88.9mm); top rail: 3 7\/8\" (98.4mm); bottom rail: 6\" (152.4mm).<\/p>\r\n

Series 560 wide style door:<\/span> Designed for the monumental market, using most available aluminum door hardware.<\/p>\r\n

Design:<\/span> Thickness: 2\" (50.8mm); stiles: 5\" (127mm); top rail: 5\" (127mm); bottom rail: 6\" (152.4mm).<\/p>\r\n

Finish:<\/span> Swing door material stocked in #17 clear and #40 bronze anodized. Other finishes available upon request.<\/p>\r\n

Assembly:<\/span> Welded corner assembly.<\/p>\r\n

Glazing:<\/span> All doors will accept 15\/16\" (24mm) sealed-unit glass.<\/p>\r\n \r\n

Options:<\/span> Top and bottom rails up to 12\" high and are available, and a variety of horizontal and vertical rails can be applied.<\/p>","Image":"\/img\/products\/swing-doors-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series-260-360-560.jpg","PathDetails":"\/media\/comdoor\/products\/series-260-360-560-doors\/S0260_360_560.pdf","PathCAD":"\/media\/comdoor\/products\/series-260-360-560-doors\/S0260_360_560.zip","PathSpecs":"\/media\/downloads\/DOOR%20SPECIFICATIONS.doc","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-4200-4300-4400-thermal-doors":{"Name":"Series 4200\/4300\/4400 Thermal Doors","Smalldesc":"Series 4200 narrow style door: Designed for general applications. Combines strength, economy, performance and typical hardware.","Description":"

Series 4200 narrow style door:<\/span> Designed for general applications. Combines strength, economy, performance and typical hardware.<\/p>\r\n

Design:<\/span> Thickness: 2 1\/4\" (57.2mm); stiles 2\" (50.8mm); top rail 2 3\/4\" (69.9mm); bottom rail 3 7\/8\" (98.4mm).<\/p>\r\n

Series 4300 medium style door: Designed for the institutional market, where a wide range of specialty hardware is usually specified.<\/span><\/p>\r\n

Design:<\/span> Thickness: 2 1\/4\" (57.2mm); stiles 3 1\/2\" (88.9mm); top rail 3 7\/8\" (98.4mm); bottom rail 6\u201d(152.4mm).<\/p>\r\n

Series 4400 wide style door:<\/span> Designed for the monumental market, using most available aluminum door hardware.<\/p>\r\n

Design:<\/span> Thickness: 2 1\/4\" (57.2mm); stiles 5\" (127mm); top rail 5\" (127mm); bottom rail 6\" (152.4mm).<\/p>\r\n

Finish:<\/span> Swing door material stocked in #17 clear anodized. Other finishes available upon request.<\/p>\r\n

Assembly:<\/span> Welded corner assembly.<\/p>\r\n

Glazing:<\/span> All doors will accept 15\/16\u201d(24mm) sealed-unit glass.<\/p>\r\n\r\n

Options:<\/span> Top and bottom rails up to 8\" (203.2mm) high; a variety of horizontal and vertical center rails are also available.<\/p>","Image":"\/img\/products\/swing-doors-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series-4200-4300-4400.jpg","PathDetails":"\/media\/comdoor\/products\/series-4200-4300-4400-thermal-doors\/S4000.pdf","PathCAD":"\/media\/comdoor\/products\/series-4200-4300-4400-thermal-doors\/S4200_4300_4400.zip","PathSpecs":"","PathThermal":"","PathBrochure":"\/media\/downloads\/Series-4000-Brochure.pdf","PathInstallation":""},"commercial-door-hardware":{"Name":"Commercial Door Hardware","Smalldesc":"Commdoor Aluminum stocks a variety of hardware to suit your selected needs.","Description":"

Commdoor Aluminum stocks a variety of hardware to suit your selected needs.<\/p>","Image":"\/img\/products\/swing-doors-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Commercial-Door-Hardware.jpg","PathDetails":"\/media\/comdoor\/products\/commercial-door-hardware\/DHW.pdf","PathCAD":"","PathSpecs":"","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-4487-thermal-patio-door":{"Name":"Series 4487 Thermal Patio Door","Smalldesc":" Heavy-duty insulated door and frame, with double weather seal between exterior and interior. Door swings on adjustable hinges. Door offers two colour options for interior and exterior.","Description":"

Heavy-duty insulated door and frame, with double weather seal between exterior and interior. Door swings on adjustable hinges. Door offers two colour options for interior and exterior.<\/p>\r\n

Design:<\/span> Door thickness: 2 1\/2\" (63.5mm) x 3 3\/4\" (95.15mm) wide stile and rails. Framing is 4 7\/8\" (123.83mm) deep x 1\" (25.4mm) wide.<\/p>\r\n

Finish:<\/span> Door and frame material stock in mill finish for anodizing or custom painting.<\/p>\r\n

Assembly:<\/span> Screw port assembly.<\/p>\r\n

Glazing:<\/span> 4487 doors and framing will accept 15\/16\u201d(24mm) double-glazed sealed unit glass.<\/p>\r\n

Options:<\/span> No vertical or horizontal intermediate rails available at this time.<\/p>\r\n

Specification:<\/span> Tested to ASTM - E283, E 331, E 547, E 330, AAMA 1304 for Air Leakage, Maximum Water Pressure, Maximum Structural Pressure and Forced Entry Resistance.<\/p>","Image":"\/img\/products\/swing-doors-460.jpg","Thumbnail":"\/img\/products\/diagrams\/Series-4487-Thermal-Door.jpg","PathDetails":"\/media\/comdoor\/products\/series-4487-thermal-patio-door\/S4487.pdf","PathCAD":"\/media\/comdoor\/products\/series-4487-thermal-patio-door\/S4487.zip","PathSpecs":"\/media\/downloads\/4487%20SPEC%20WORD%20DOCUMENT.doc","PathThermal":"\/media\/downloads\/S4487%20Thermal%20Chart.pdf","PathBrochure":"","PathInstallation":""}}},"sliding-and-bi-fold":{"Name":"Sliding And Bi-Fold","Slug":"slidingBiFold","Desc":"The Series 1781 Bi-folding Door was developed to provide the ability to incorporate large operable opening systems. The Bi-Folding Door is available in both internal and external applications. The 1750 Series Sliding Door is also available for interior applications.","RenderingUrl":"bi-fold.jpg?v=1.1","series":{"series-1750-sliding-door":{"Name":"Series 1750 Sliding Door","Smalldesc":" 1750 Series Sliding Door is a multi-track system using tandem bottom rollers. Panels are fabricated using 1 3\/4\" (44.5mm) aluminum door profiles; EGRESS DOOR INSERT NOT AVAILABLE.","Description":"

1750 Series Sliding Door is a multi-track system using tandem bottom rollers. Panels are fabricated using 1 3\/4\" (44.5mm) aluminum door profiles; EGRESS DOOR INSERT NOT AVAILABLE.<\/p>\r\n

Finish:<\/span> Sliding door materials stocked in #17 clear and #40 bronze anodized. Other finishes are available upon request.<\/p>\r\n

Limitations:<\/span> 1750 Series is designed for interior applications. Min. panel size 36\" x 84\" & max. panel size 72\" x 130\". Each roller has weight limitation of 120 lb. Therefore, each panel should not exceed 240 lb. including glass and hardware. The ratio between height and width should not exceed 3:1 to avoid tilting panels during operation.<\/p>\r\n

Assembly:<\/span> Welded corner bracket assembly.<\/p>\r\n

Strength:<\/span> Refer to wind load charts for maximum allowable span. Consult structural engineer for final design.<\/p>\r\n

Anchoring:<\/span> Refer to fabrication and installation manual.<\/p>\r\n

Glazing:<\/span> Series 1750 Doors will accept 3\/16\" (5mm), 3\/8\" (10mm) or 1\/2\" (12mm) single glass and 29\/32\" (23mm) sealed unit.<\/p>","Image":"\/img\/products\/sliding-and-bifold-460.jpg","Thumbnail":"\/img\/products\/diagrams\/1750 V3.png","PathDetails":"\/media\/comdoor\/products\/series-1750-sliding-door\/S1750.pdf","PathCAD":"\/media\/comdoor\/products\/series-1750-sliding-door\/S1750.zip","PathSpecs":"\/media\/downloads\/1750%20SPEC%20WORD%20DOCUMENT.doc","PathThermal":"","PathBrochure":"","PathInstallation":""},"series-1781-bi-folding-door":{"Name":"Series 1781 Bi-folding Door","Smalldesc":" Series 1781 is a thermally broken top-hung bi-fold door system using an isobar thermal break. 0\/a frame depth is 4 1\/2\" and panel thickness is 2 1\/4\" using eclipse (e3) carrier system.","Description":"

Series 1781 is a thermally broken top-hung bi-fold door system using an isobar thermal break. 0\/a frame depth is 4 1\/2\" and panel thickness is 2 1\/4\" using eclipse (e3) carrier system.<\/p>\r\n

Finish:<\/span> Aluminum extrusions are stocked in #10 mill finish #17 clear anodized. Other finishes available upon request. Delivery will depend on finish.<\/p>\r\n

Limitations:<\/span> Maximum panel weight: 220 lb. (100 kg) each panel; Maximum panel width: 39\" (990mm); Maximum panel height: using 1\" igu (6mm+6mm) 118\" [2997mm]; Maximum numbers of panels: 8 panels fold to one side.<\/p>\r\n

Assembly:<\/span> Welded corner bracket assembly.<\/p>\r\n

Glazing:<\/span> Series 1781 doors will accept 1\" (25mm) sealed units.<\/p>\r\n

Installation requirements:<\/span> Top track must be anchored to solid structure adequate to carry the total weight of the door. At each end of the track, the door frame must be levelled, squared and bottom track must be plumbed with the top track.<\/p>","Image":"\/img\/products\/sliding-and-bifold-460.jpg","Thumbnail":"\/img\/products\/diagrams\/S1781-V4.jpg","PathDetails":"\/media\/comdoor\/products\/series-1781-bi-folding-door\/S1781.pdf","PathCAD":"\/media\/comdoor\/products\/series-1781-bi-folding-door\/S1781.zip","PathSpecs":"\/media\/downloads\/1781%20SPEC%20WORD%20DOCUMENT.doc","PathThermal":"","PathBrochure":"\/downloads\/Series-1781-Brochure.pdf","PathInstallation":"\/media\/downloads\/1781%20INSTALLATION.pdf"}}},"miscellaneous-products":{"Name":"Miscellaneous Products","Slug":"miscellaneousProducts","Desc":"Commdoor offers a wide assortment of extruded products including tubes, rails, clips and architectural profiles.","RenderingUrl":"miscellaneous-products-new.jpg","series":{"miscellaneous-products":{"Name":"Miscellaneous Products","Smalldesc":"Commdoor offers a wide assortment of extruded products including tubes, rails, clips and architectural profiles.","Description":"

Commdoor offers a wide assortment of extruded products including tubes, rails, clips and architectural profiles.<\/p>","Image":"\/img\/products\/miscellaneous-products-460.jpg","Thumbnail":"","PathDetails":"\/media\/comdoor\/products\/miscellaneous-products\/MISCELLANEOUS.pdf","PathCAD":"","PathSpecs":"","PathThermal":"","PathBrochure":"","PathInstallation":""}}}}